LTH MOD53 - Set Point Level, Mode, and Timers

8 Set Points
47
8 Set Points
The Set Point configuration is separated into two menus, the first “Set Points 1&2”
and the second “Set Points 3&4” (if fitted). The menu structures for Set points 1,2
& 3 are identical, and provide a high level of flexibility in the configuration of the
relay outputs.
Set Points 1&2
Set Points
Menu Header
Ø
ØØ
Ø ×
××
×
SP1 : Disabled
Sensor IP
Tem
p
IP
Cleanin
g
Set Point Source
Control. When
cleaning is
selected the
following menu
items will be
replaced by the
”Cleaning”
menus
Ø
ØØ
Ø ×
××
×
SP1 Tri
g
: Hi
g
h
Low
Band
Latch
Set Point Trigger
Ø
ØØ
Ø ×
××
×
4.00
4.00 4.00
4.00
Set Point 1
Set Point Level
(When trigger is “High” or “Low”)
Ø
ØØ
Ø ×
××
×
Continued on next page ……..