LTH MOD53 - Appendix D - Customer Setup

Appendix D – Customer Setup
91
Appendix D – Customer Setup
Instrument Serial No. : _____________________
Sensor Serial/Type No. : _____________________
Parameters
Units
Probe Type
Temperature Units
Temperature Compensation
Fixed Temperature Input
Fixed Salinity Input
Pressure Compensation
Pressure Units
Fixed Pressure Input
Set Point 1
SP1 Source
SP1 Trigger
SP1 Level (Latch High)
SP1 Latch Low
SP1 Mode
SP1 Dose Alarm
SP1 Alarm Time (mm:ss)
SP1 Delay (mm:ss)
SP1 Hysteresis
(% of SP Level)
SP1 Cycle Time (mm:ss)
SP1 Proportional Band
(% of range)