13 Configuration
72
Ø
ØØ
Ø ×
××
×
2500
25002500
2500
Membrane Correction
The Membrane Correction Factor can be
set at this menu parameter.
Ø
ØØ
Ø ×
××
×
Errors : Enabled
Disabled
This function will disable/enable the
flashing error messages on the main
display. When disabled, a flashing “Bell”
character will indicate an error is present.
Ø
ØØ
Ø ×
××
×
IP Filter : Out
Input Filtering.
10 Secs
20 Secs
40 Secs
1 Min
3 Mins
5 Mins
Ø
ØØ
Ø ×
××
×
Input Filtering (Averaging)
When very noisy environments are encountered, this function will allow the user to
filter the sensor readings by taking a running average over the time period
selected. (From 10 seconds to 5 minutes).
To Next Page
Loading...