Lucent Technologies PARTNER Voice Messaging User Manual

Programming the Messaging System
Recording the Automated Attendant Menu Prompt
23
Recording the Automated Attendant Menu
Prompt
Before you begin, locate Form 3: Automated Attendant Menu Prompt for PARTNER Voice
Messaging.
CAUTION:
You should record the Automated Attendant Menu Prompt when the system is idle. If the
system receives a call while you are recording the prompt, the system plays the factory-set
Automated Attendant Menu Prompt. Keep in mind that as soon as you begin recording, any
previously recorded prompt (except the factory-set prompt) is erased.
To record the Automated Attendant Menu Prompt for PARTNER Voice Messaging Automated
Attendant Service:
1. Log into System Administration according to the appropriate procedure.
2. Press
3 to administer the Automated Attendant Menu Prompt.
3. Press 1 to record the Automated Attendant Menu Prompt shown on Form 3.
4. Press 1 to end recording, and do one of the following:
— To approve the Automated Attendant Menu Prompt, press
*#.
— To play back the Automated Attendant Menu Prompt, press 23.
— To re-record the Automated Attendant Menu Prompt, press 21. Go to Step 3.
— To exit, press *7. This action restores the factory-set prompt.
Listening to the Automated Attendant Menu
Prompt
To listen to the current Automated Attendant Menu Prompt for PARTNER Voice Messaging
Automated Attendant Service:
1. Log into System Administration according to the appropriate procedure.
2. Press
3 to administer the Automated Attendant Menu Prompt.
3. Press 0 to hear the Automated Attendant Menu Prompt.
The system plays the current Automated Attendant Menu Prompt.

Lucent Technologies PARTNER Voice Messaging Specifications

General

Brand	Lucent Technologies
Model	PARTNER Voice Messaging
Category	Computer Hardware
Language	English