Overview
37
6
Testing Your System’s
Operation
Overview
If you cannot solve a problem with your voice messaging system after using the procedures
contained in this section, contact your local Authorized Dealer.
Verifying the System Programming
After you finish programming the PARTNER Voice Messaging and the communications system,
you should perform the tests identified in the following table to verify system operation. If you have
a display phone at extension 11, you should perform these tests from extension 11 leaving
extension 10 for the receptionist to handle calls.
To verify: Perform:
Automated Attendant Service programming Tests 1 and 2
Call Answer Service programming Tests 1, 3, and 4
To Next Page
Loading...