Programming the Communications System
Assigning VMS Hunt Delay
33
Assigning VMS Hunt Delay
Check the System Configuration Form, Page 2, VMS Hunt Delay. If Delayed is specified, follow the
appropriate procedure below.
For PARTNER ACS Release 3.0 or later (#506)
1. Press #506.
2. At the Mode: prompt, enter Day (1) or Night (2).
3. Enter the line number.
4. Press D until the appropriate value (0 to 6 rings) displays.
5. To program another line, press n or p until the appropriate line number displays.
6. Press D until the appropriate value displays.
7. Repeat Steps 4 and 5 as necessary.
For All Other Communications Systems (#506)
1. Press #506.
2. Press D until the appropriate value (Immediate - 2 rings or Delayed) displays.
To Next Page
Loading...
Need help?
General