EasyManuals Logo

Lucent Technologies PARTNER Voice Messaging User Manual

Lucent Technologies PARTNER Voice Messaging
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Programming the Communications System
Assigning Automatic Extension Privacy (#304)
29
Assigning Automatic Extension Privacy
(#304)
If VMS Hunt Delay is set to Immediate, use this procedure to prevent users from accidentally
picking up calls sent to the voice messaging system.
To set Automatic Extension Privacy (#304) to Assigned for the PARTNER Voice Messaging
extensions 78 and 79 specified on Form B1:
1.Press #304.
2.Enter 78.
3.Press D until the display reads 1 Assigned.
4.Press n or p until the next PARTNER Voice Messaging extension number (that is,
79) specified on the System Extensions Form displays.
5.Press D until the display reads 1 Assigned.
Assigning Automatic VMS Cover (#310)
To change the Automatic VMS Cover setting for an extension to Assigned as indicated on the
Customized Extension Settings Form:
1.Press
#310.
2.Enter the number of the first extension to which Automatic VMS Cover is to be assigned.
3.Press
D until the display reads 1 Assigned.
4.To program another extension, press
n or p until the extension number shows on the
display.
5.Repeat Steps 3 and 4 for each extension to which Automatic VMS Cover is to be assigned.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies PARTNER Voice Messaging and is the answer not in the manual?

Lucent Technologies PARTNER Voice Messaging Specifications

General IconGeneral
BrandLucent Technologies
ModelPARTNER Voice Messaging
CategoryComputer Hardware
LanguageEnglish