Lucent Technologies PARTNER Voice Messaging - Voice Mailbox Transfer (F14); Voice Mail Auto Dial

PARTNER Voice Messaging Installation and Programming
Centralized Telephone Programming
36
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to a PARTNER Voice Messaging mailbox
without ringing the associated extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on the Button Assignments
Form:
1. Press
f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button.
4. Press
f14.
5. Do one of the following:
— Go to Step 3 of the next procedure to program another button for this extension.
— Press
c and go to Step 2 of any button programming procedure in this section to
program a button for a different extension.
— Press
f00 to exit.
Voice Mail Auto Dial
This intercom Auto Dial button allows the subscriber to access PARTNER Voice Messaging with
the touch of one button.
To program a Voice Mail Auto Dial button as specified on the Button Assignments Form:
1. Press
f00ssc.
2. Dial the number of the extension to be programmed.
3. Press a programmable button.
4. Press left
i777.
5. At this point, do one of the following:
— Press
c and go to Step 2 of any button programming procedure in this section to
program a button for a different extension.
— Press
f00 to exit.