PARTNER Voice Messaging Installation and Programming
Changing the System Manager’s Password
26
Changing the System Manager’s Password
This section tells you how to change the System Manager’s password (for mailbox 0). The factory-
set password for mailbox 0 is 1234. To prevent unauthorized programming of the system, you
should change the default password immediately after installation. You must assign four digits for a
password. It is recommended that you create a password from random, nonsequential digits.
You cannot reinitialize the System Manager’s password. If you change the password and forget it,
contact your local Authorized Dealer for assistance.
To change the System Manager’s password for mailbox 0:
1. Log into System Administration according to the appropriate procedure.
2. Press
5 to change the password.
3. Enter four digits for the new password and press
# when prompted.
4. Re-enter your new password and press
# when prompted.
The new password is now active.
To Next Page
Loading...
Need help?
General