LUMINELL SL2 - Operator Panel and Controls; Operator Panel Overview

INSTALLATION & USER'S MANUAL SL2 Page 13
OPERATOR PANEL, OVERVIEW
1. "Soft button": the function appears in the display window next to the button.
2. Both lamps ON/OFF.
3. Spot beam (restarted at last used setting).
4. Flood beam (restarted at last used setting).
5. Both lamps ON/OFF.
6. Increase light intensity (Dim up in five steps, restarted at last used level *).
7. Decrease light intensity (Dim down in five steps, restarted at last used level *).
8. Joystick (”Hall effect” proportional).
9. Display (TFT 2,4”).
* LED intensity levels are 20% - 40% - 60% - 80% - 100%.
Note: Several sections of the manual refer to the above figures
8
7
6
5
1
2
1
3
4
9