INSTALLATION & USER'S MANUAL SL2 Page 33
Synchronize the system
The easiest way to synchronize the system after reboot is to enter the quick start menu and
select the “Park” function; the system will then activate the horizontal and vertical movement
until the searchlight absolute position sensors sends their signals back to the control system
and thereby updating it with the correct positioning.
If a parking position has been set, the searchlight will end this procedure by parking.
If necessary, the origin can be set after the steps above to give an accurate readout of the
indicator. To set the origin, please see 16.8.5.1 Store origin.
To Next Page
Loading...
