INSTALLATION & USER'S MANUAL SL2 Page 63
Options setup
This menu is used for installing unlock codes that provide access to additional options.
Press “OK” to enter the “Enter Code”-screen.
The code is entered by moving the joystick up and down to select correct character. To move to
next character the joystick is moved to the right. Finish the process by select “OK” by pushing
the button at the right bottom corner of the display
The codes are individual for each operator panel. For obtaining unlock codes please contact
Luminell for quotation. Luminell also need the MAC-id of the related control panel to generate
the correct code. Please see 16.6 Info.
The following options are activated as default but can be deactivated by entering a code:
- Display indicator,
- Fixed positions, please see 15.1 Fixed positions.
- Sweep (auto sweep horizontal), please see 15.2 Sweep.
- Surveillance, please see 15.3 Surveillance.
- Synchronized control, please see 15.5 Synchronized control.
- Language 16.8.2 Language.
-
Not activated and need a code from Luminell:
- Restricted zone
To Next Page
Loading...
