INSTALLATION & USER'S MANUAL SL2 Page 61
OP Rotation
This menu is used if you have mounted an operator panel pointing in a different direction than
towards the bow of the boat.
The defaults setting when delivered (0 degrees) requires that the operator panel is mounted
pointing towards the bow of the boat, see page 61.
By changing this setting, you can compensate for different mounting positions while maintaining
accurate indicator function, you can choose from four different positions.
0 degrees (default)
90 degrees
180 degree
270 degree
Press “OK” to save and exit back to the “Installation” submenu.
To Next Page
Loading...
