Page 36 INSTALLATION & USER'S MANUAL SL2
LIGHT CONTROL
Light ON/OFF
This searchlight is equipped with two LED lamp modules containing both spot and flood
capability.
Both lamps will always be turned on by pressing button (2) or (5) and starts with last used
setting for dim level and beam angle. Light ON is indicated by the sun symbol.
To turn off the light, press button (2) or (5) again.
In the bottom part of the display there are two sun-symbols that indicates the status of the
LED-lamps.
Spot & flood control
Each LED lamp module have both flood and spot sectors, these sectors are controlled from the
operator panel according to the below illustration.
The light always starts with the last used beam setting, both LED modules is always controlled
together and cannot have separate settings, no visible indication of selected beam angle in
display.
To Next Page
Loading...
