INSTALLATION & USER'S MANUAL SL2 Page 83
SET CAMERA VIDEO FORMAT STANDARD
This chapter describes how to configure the cabinet control-system to change the video format
during camera startup.
The video standard is NTSC for the United States, Canada, Mexico, Asia and South America.
PAL is used primarily in Europe.
The unit is usually configured with video output set as PAL as standard setting.
Change of video standard requires that you enter the system's “Factory setup”-menu.
Note: navigation in “Factory setup”-menu should be done with extreme caution as incorrect
settings can change the searchlight behavior and make features unusable.
Menu navigation
The user interacts with the menu system using the three buttons, the “Down” button, the “Right”
button and the “OK” button.
Down Button
The main function of the “Down” button is to shift between the menu categories. It also has two
alternate generic functions.
1. While in submenus listing items of various types the “Down” button scrolls down in the list.
2. While entering a value of some sort, the “Down” button decrements that value.
Right Button
The main function of the “Right” button is to shift between the submenus of the selected menu
category. It also has two alternate generic functions.
1. While in submenus listing items of various types the “Right” button scrolls up in the list.
2. While entering a value of some sort, the “Right” button increments that value.
OK Button
The “OK” button enters and exits submenus.
To Next Page
Loading...
