INSTALLATION & USER'S MANUAL SL2 Page 47
Switch
If there are more than one Luminell searchlight in the network, then any operating panel can
control any of the connected Luminell searchlights. Each searchlight should be given a unique
name during installation for this to work properly.
To enter the “Switch” submenu open the quick start menu and press the upper right button.
In this menu all the available searchlights should be listed. To change which searchlight being
controlled, navigate to the desired searchlight and press “OK”.
The operating panel should now control the newly selected searchlight which is shown on the
indicator screen.
To Next Page
Loading...
