Page 90 INSTALLATION & USER'S MANUAL SL2
MENU – CAMERA SETTINGS
The camera settings “Zoom” and “Palette” can be accessed in two ways; either you set them
directly from CAM mode-screen described in chapter 22 or by selecting “CAM settings” in the
main menu.
The basic camera settings can only be accessed if the camera is activated. Activated camera is
indicated by the letter “C” in bottom left of the display.
If the menu rows are dimmed the camera must first be activated before changes can be made
please see 22.1 Activate the thermal camera.
Navigate down to “CAM settings” and press “OK”.
Basic camera settings.
To Next Page
Loading...
