LUMINELL SL2 - Cabinet Card

Page 22 INSTALLATION & USER'S MANUAL SL2
Cabinet card
Luminells control system is stable and future-proof and the cabinet card is equipped with
several inputs and outputs as to allow the communication with the searchlight but also
communicate with computers, radio receivers, limit switches (via optocoupler) etc.
On the output side, we have relay-controlled alarm output (NO, NC) for external alarm handling
and outputs for controlling relays (via optocoupler).
Relay NO
Relay Common
Relay NC
Signalcable
to searchlight
RS232
RS422
RS485*
Opto 1A ->
Opto 1C <-
Opto 2A ->
Opto 2C <-
24Vdc
0V
24Vdc from
PSU
Fuse T6,3A
Buttons for
Menu
navigation
See:
Menu
navigation
CPU Card
Alarm Output
RJ45 Ethernet connection
(connects with patchcable
to keystone pass-through
connector in enclosure
CAN H (green) CANL (yellow)
Fan control*
2
(grey)
+24Vdc (brown) 0V (white)
*
1
Standard setting.
*
2
Wire is installed but has no function on SL2.