INSTALLATION & USER'S MANUAL SL2 Page 7
WARNINGS AND INFORMATION
CAUTION!
Before servicing any part of the searchlight system, make sure all power is
switched off!
Cleaning
Never wash the searchlight with water under high pressure because this can
penetrate through the seals and cause damage to mechanical and electrical
components.
Do not use strong solvents such as thinner or acetone to clean the searchlight
body or the operator panel.
Deicing
Removal of ice should be done with caution. Physical violence can damage the
LED-lamp modules or the searchlight driving mechanics.
Safety reminder
Remember to break all electrical power to system before
starting any work in the electrical box or the searchlight
unit.
To Next Page
Loading...
