LUMINELL SL2 - Operator Panel

Page 72 INSTALLATION & USER'S MANUAL SL2
Operator Panel
Technical Data Operator Panel
Input Spec
Nominal voltage
24VDC (20...28VDC)
Power consumption in
operation (panel only)
Max 5W
Power consumption in
standby mode (parked, light
off)
2,2W
Current at 24V
Max 0,2A
Environmental Specifications
Operating ambient
temperature
-20ºC to +55ºC
Storage temperature
-25°C to +70°C
IP class
IP56
Vibration
Designed for IEC 60945
Shock
Designed for IEC 60945
Dimensions & weight (see drawings for details)
Static size (WxDxH) mm
116 x 114 x 158
Weight
0,5 kg
Materials & Colors
Panel / back cover
Anodized aluminum / ABS
General Specifications
Electrical interface to
vessel
- DC power 3 wires (+/-/earth) (see picture on page 28 for
details)
- Ethernet to operator control panel or switch (if any)
Mechanical interface to
vessel
- 4 x Ø3,5mm holes for screws (screws not included)
- Sealing between vessel and panel (attached)
Functions
Direct button functions
- Horizontal and vertical movement
- Light on/off
- Beam angle spot/flood
- Dimming step by step
Standard menu functions
- Configurable park position
- Up to 4 programmable fixed positions
- Sweep in horizontal direction
- Surveillance in horizontal and vertical direction
- Switch to another searchlight in the network
- Synchronize searchlights