INSTALLATION & USER'S MANUAL SL2 Page 39
Store fixed position
If no position has been stored or the searchlight is already at the stored position it will not move.
To store a new or change a fixed position, enter one of the regarded memories (A, B, C or D) in
the menu. If there is already a preprogrammed fixed position stored at the selected memory, the
searchlight will start to move to that position.
Either select a free memory or, if you want to change this item, take control over the searchlight
by moving the joystick (also aborting an eventual movement of the searchlight).
Now – by using the joystick - move the searchlight to the desired new position and select light
beam angle and dimlevel to be stored with the position, the light will be activated when position
is reached. Press “Store”.
The current position is now stored.
Note that you always overwrite a previously stored position.
To Next Page
Loading...
