Page 40 INSTALLATION & USER'S MANUAL SL2
Sweep
At sweep mode, the searchlight automatically moves back and forth between two individually
programmable positions in the horizontal plane.
New Sweep
To enter the "Sweep" submenu, open the quick start menu and press the left middle button
"Sweep".
To start a new sweep, navigate down to “New” in the “Sweep” menu and press “OK”.
The default setting for a sweep is a horizontal sweep of 20°.
To stop a sweep, enter the "Sweep" submenu and choose “Stop” or just move the searchlight
by using the joystick.
To resume the sweep, enter the "Sweep" submenu and choose “resume”.
To Next Page
Loading...
