LUMINELL SL2 - Page 81

INSTALLATION & USER'S MANUAL SL2 Page 81
Spec - Front window heater/ Deicer
Type
Etched Polyimide foil heater with temperature controller
Rated Power
~10W
Supply
24Vdc supplied from electric box
Switch-on temperature
+12C or bellow
Materials & Colors
Material housing
Acid proof stainless steel 1.4401
Paint housing
- Powder coat White RAL 9016, gloss 70
- Powder coat grey RAL 7035, gloss 20
Powder coat black RAL 9005, gloss 20
Front window material
Germanium
Environmental - Camera housing
Operating ambient
temperature
-40ºC to +55ºC
Storage temperature
-25°C to +70°C
IP class
IP66
Thermal Shock
No damage or permanent degradation after extreme thermal
shock from one extreme of the operating temperature range
to the other.
Mechanical Shock
No damage or permanent degradation after exposure to
shock pulses of 250 g (1.5msec half-sine) and 500g (0.8msec
half sine) along any axis.
Vibration
Meets all requirements of this specification and exhibits no
damage or permanent degradation after exposure to random
vibration along any axis up to 4.3 grms per the profile
specified below.
Frequency
(Hz)
Acceleration
Density (G2/Hz)
10
0.040
20
0.100
100
0.100
800
0.002
1000
0.002
Altitude
Meets all requirements of this specification and exhibits no
damage or permanent degradation after exposure to pressure
equivalent to 12 km above sea level.