LUMINELL SL2 - Page 86

Page 86 INSTALLATION & USER'S MANUAL SL2
By pressing “Activate” the thermal camera is powered up and the video signal is sent to the
monitor. All camera settings will change from grey to white text and be selectable, see
description below. A second press on the same button turns the camera off.
Figure 1 Palette. (Image source FLIR
®
)
Tilt camera up
Tilt camera down
Activate and
deactivate camera
See Figure 1 below
Zoom options:
- X2
- X4
- X8 (640 only)
Return to indicator
screen
Tilt indicator