Lust CDA3000 - Page 71

2-38
Engineering Guide CDA3000
2 Drive definition
Technical data of the asynchronous servomotors with self coo-
ling
Abbreviations used
Self cooling
M
0
[Nm]
MN
[Nm]
PN
[kW]
I
0
[A]
I
N
[A]
nN
[rpm]
JL
[kgcm²]
m
[kg]
nmax
[rpm]
ASM (H)-11 -2xxx3 1.5 1.3 0.41 1.6 1.4 3000 2.8 6.5 12000
ASM (H)-12 -2xxx3 2 1.7 0.54 2.1 1.8 3000 3.7 7.5 12000
ASM (H)-13 -2xxx3 2.7 2.3 0.72 2.74 2.3 3000 4.7 8.5 12000
ASM (H)-14 -2xxx3 4.2 3.5 1.1 4 3.3 3000 6.5 10.2 12000
ASM (H)-15 -2xxx3 5.2 4.7 1.5 5.4 4.5 3000 8.9 12.8 12000
ASM (H)-21 -2xxx3 4.2 3.5 1.1 3.6 3 3000 10.9 10.8 12000
ASM (H)-22 -2xxx3 5.6 4.7 1.5 4.7 3.9 3000 14.4 13.2 12000
ASM (H)-23 -2xxx3 8.4 7 2.2 6.7 5.6 3000 21.5 16.2 10000
ASM (H)-24 -2xxx2 12 10 2.1 6.4 5.3 2000 29.8 20.3 10000
ASM (H)-25 -2xxx2 15 13 2.7 7.7 6.6 2000 38.4 24 8000
ASM (H)-31 -2xxx1 15.5 13 2.1 6.2 5.2 1500 70 29.8 8000
ASM (H)-32 -2xxx1 20 17 2.7 8.2 6.8 1500 90 33 8000
ASM (H)-33 -2xxx1 27.5 23 3.6 10.3 8.7 1500 130 41.5 8000
ASM (H)-34 -2xxx1 42 35 5.5 15.1 12.6 1500 209 56.6 8000
ASH-41-2xxx1 47 40 6.3 21 17.9 1500 450 87 8000
ASH-42-2xxx1 70 60 9.4 30 25.5 1500 740 113 8000
ASH-43-2xxx1 85 70 11 37 30.4 1500 960 135 8000
Table 2.7 Technical data, self cooling
Term Explanation
M
0
Standstill torque Thermal limit torque of the motor at standstill. The motor can
deliver this torque for an unlimited length of time.
I
0
Standstill current Effective value of the motor phase current required to generate
the standstill torque.
M
N
Nominal torque Thermal limit torque of the motor at nominal speed n
N
.
I
N
Rated current Effective value of the motor phase current required to generate
the nominal torque.
P
N
Rated power Full-load power of the motor at the nominal working point
(M
N
, n
N
) at rated current I
N
and rated voltage U
N
.
M
max
, I
max
Limit curve A maximum of five times the rated current may be applied to
the motors.