To manually select a track to record to:
Press the Song button and the Metronome button simultaneously to
enter Record Wait Mode.
Turn the Data Control knob to select between Track 1 and Track 2.
If either of the tracks contains recorded data, the display will show a
dot “
“ in the bottom right hand corner:
You will also see options for “Clear” (abbreviated “clr”) and
“Cancel” (abbreviated “cAn”), which you can ignore for the
moment. These will be discussed later in this section.
WhentheLEDdisplayshowsthetrackyouwish
to record to, you may begin playing whenever you
are ready, and recording will automatically begin as
soonasyouplaytherstnote.
2
3
1
To Next Page
Loading...
