To Clear all Data in the Song Recorder:
Use the following procedure to clear all data from Tracks 1 and 2 in the Song Recorder:
Press the Song button and the Metronome button at the same time
to enter Song Recording Mode. This will start the Metronome and
place the Song Recorder in Record Wait.
TurntheDataControlknobuntiltheLEDdisplays
.
Begin playing the keyboard. All previously
recorded data on Tracks 1 and 2 will be cleared,
and the notes you are now playing will be recorded
on Track 1.
or…
To clear all data on Tracks 1 and 2 without recording anything
new, after step 2, press the Song button twice.
You will then be back in Performance Mode, with all data cleared
from the Song Recorder.
Note that the “Clear” function always erases recorded notes from
both tracks. For instructions on how to erase data from only one of
the
twotracks,pleasereadthefollowingsection,“ToEraseaSingle
Track in the Song Recorder.”
2
To Next Page
Loading...
