M-Audio DCP-200 - Program, Bank LSB, and Bank MSB Sending

User Guide 57DCP-200
Program Change, Bank LSB, and Bank MSB
ThefollowingsectiondemonstrateshowtosendMIDIProgramChanges,BankLSB(LeastSignicantByte)
andBankMSB(MostSignicantByte)valuesfromDCP-200toanexternalMIDIdeviceorvirtualinstrument
software program.
Sending MIDI Program Changes
 TherearetwowaystosendMIDIProgramNumberchanges.Youcaneitherenterasinglespecic
Program Number (Data Control knob assignment remains unchanged), or you can assign the Data
Control knob to send MIDI Program Changes.
‣  TosendasinglespecificProgramNumber(DataControlknobassignmentremains
unchanged):
 PresstheVoice/FunctionbuttontoenterEditMode.
Press the Program Key
(F#5).
1
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
pNo
2
MASTER VOLUME
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
vol
F#5
Default
0 1 2 3 4 5 6 7 8 9
ENTER
C5 C6 C7
ON / OFF