M-Audio DCP-200 - Page 56

User Guide56 DCP-200
Now you are back in Performance Mode, and you can use the Data
Control knob to send values for the Continuous Controller (CC) you
speciedinStep3.
For example, if you entered 01 (modulation) in Step 3, the Data
Control knob will now behave like a modulation wheel.
The Data Control knob can be assigned to send standard MIDI Continuous Controller commands up
to127(inadditiontoothertypesofcontrolinformationspecictoDCP-200).PleaseseeAppendixC-
Data Control Assignments and MIDI CC List for more information.
‣ NOTE: To reassign the Data Control knob for Voice Selection, press the Voice / Function
button and then press the Eb2 key. (This procedure is illustrated at the beginning of
the “Edit Mode” section.)
5
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
64