M-Audio DCP-200 - Tempo; Time Signature

User Guide 19DCP-200
Turn the Data Control knob clockwise to increase the metronome
volume, or counter-clockwise to decrease the metronome volume.
The metronome volume level will be indicated as a value from 0-127
in
theLEDdisplaywindow.
‣ NOTE: Now the Data Control knob is assigned to controlling
metronome volume instead of Voice Selection. To reassign the Data
Control knob for Voice Selection, press the Voice / Function button
and then press the Eb2 key. (This procedure is illustrated at the
beginning of the “Edit Mode” section.)
Tempo
The metronome can be programmed for any tempo between 20 beats per minute (bpm) and 280 bpm.
‣ To change the metronome’s tempo:
  1. PressandholdtheMetronomebutton(5).TheLED
display will show the current tempo.
2. Turn the Data Control knob clockwise to increase
tempo, or counter-clockwise to decrease tempo.
Time Signature
The metronome can support the following time signatures: 2/2, 2/4, 3/4, 4/4, 5/4, 6/8, 7/8, 9/8, 12/8
‣ To change the metronome’s time signature:
Press the Voice/Function button on the left hand panel.
3
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
116
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
120
1
2
1
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
PNo