M-Audio DCP-200 - Sending Bank MSB Changes

User Guide 63DCP-200
Sending Bank MSB Changes
 TherearetwowaystosendBankMSBchanges.YoucaneitherenteraspecicMSB(MostSignicant
Byte)valueusingtheNumericDataEntryKeys,oryoucanassigntheDataControlknobtosendBank
MSB changes. (Please note that after any kind of bank message, it is usually necessary to follow up with
a MIDI Program Change message in order to affect a sound change on the receiving device.)
‣
TosendaspecificBankMSBvalueusingtheNumericDataEntryKeys:
 PresstheVoice/FunctionbuttontoenterEditMode.
Press the Bank MSB Key
(Bb5).
1
2
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
pNo
Bb5
Default
0 1 2 3 4 5 6 7 8 9
ENTER
C5 C7
ON / OFF