M-Audio DCP-200 - 5 Using DCP-200 for the First Time; Connect the Pedal Board and Power Cable

User Guide 9DCP-200
5 Using DCP-200 for the First Time
EverythingyouneedtoknowtostartmakingmusicwithDCP-200isrighthereinthisshortsection.
Connect the Pedal Board
Connect the Pedal Board cable to the Pedal
Connector on the rear panel of the piano.
Connect the Power Cable
Make sure that the Power On/Off Switch is in the “Off”
(up) position.
Connect the included AC cable to the Power Socket on
the rear panel of the piano, and plug the other end into an
active AC outlet.
ON / OFF
1
AC100-240V – 50/60HZ
PEDAL
CAUTION
AC100-240V – 50/60HZ
PEDAL
CAUTION
2