M-Audio DCP-200 - Panic Key Functionality

User Guide66 DCP-200
Panic Key (F#6)
PressingthePanickeywillsendouta‘ResetAllControllers’and‘AllNotesOff’MIDIMessageonALLMIDI
Channels 1 - 16. This can be especially useful for clearing “stuck notes” when controlling external MIDI devices
or software with DCP-200.
‣ To use the Panic key to send out a ‘Reset All Controllers’ and ‘All Notes Off’ MIDI Message on
ALL MIDI Channels 1 - 16:
PresstheVoice/FunctionbuttontoenterEditMode.
Press the Panic Key (F#6)
‣ NOTE: The Piano Reset procedure described at the beginning of the Additional Features section also
sends out a “Reset All Controllers” and “All Notes Off” MIDI Message, but on MIDI Channel 1
only.
To do a Piano Reset, press the Reverb and Voice/Function buttons at the same time.
For a complete list of MIDI commands sent during a Piano Reset, see Appendix A: Defaults.
1
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
pNo
2
F#6
Default
0 1 2 3 4 5 6 7 8 9
ENTER
C5 C7
ON / OFF