M-Audio DCP-200 - Connecting via USB Cable

User Guide44 DCP-200
Connecting DCP-200 to your Computer
Your DCP-200 is class-compliant. This means you may simply connect your DCP-200 to your Windows XP,
Windows Vista or Mac OS X computer using the provided USB cable and switch the piano on. No additional
installation or drivers are required.
Connecting the USB cable:
With your computer on and all
programs/applications closed, connect
one end of the included USB cable to an
open USB port on your computer.
Connect the other end of the included USB
cable to the USB jack on the front of the
DCP-200 Connections Panel.
Make sure DCP-200 is powered on.
That’s it! Now MIDI (Musical Instrument Digital Interface) data can be sent between DCP-200
and your computer.
1
2
Headphones
Aux In
Line Out
MIDI
Out
1
2
Input
Level
USB
3
ON / OFF