M-Audio DCP-200 - Running the Sibelius First Software

User Guide48 DCP-200
Follow the on-screen prompts to install the software.
    Oncetheinstallationhasnished,proceedtothenextsection:
Running the Sibelius First Software.
‣ Note: You can also nd more detailed installation instructions in the Sibelius First Installation Guide
booklet included in the Sibelius First product box.
Running the Sibelius First Software
Make sure DCP-200 is connected to your computer’s USB input, and DCP-200 is
powered on.
Launch Sibelius First:
< On Windows computers,
double-click the Sibelius 5 First icon on your desktop.
< On Mac,
double-click your hard disk icon, navigate to the Applications
folder, then double-click the Sibelius 5 First program icon.
When you see the Try Sibelius
Firstwindow,clicktheEnterSerial
Number button.
2
3
3
1
2
➚