User Guide 45DCP-200
Connecting the DCP-200 Auxiliary Input
The Auxiliary Input of the DCP-200 allows you to connect the audio output of a computer, MP3 player,
or other audio device to DCP-200, and hear that audio device play through the stereo speakers built in
to DCP-200. This feature can be very useful when you want to play along with pre-recorded music, or
when you are working with music software.
To connect your computer’s audio output to the DCP-200 Auxiliary Input:
Set a comfortable volume level for DCP-200 according
to the “Set a Comfortable Volume Level” instructions
in the “Using DCP-200 for the First Time” section at the
beginning of this User Guide.
Turn the Input Level knob all the
way down.
Connect the 1/8” end of the included
1/8” TRS to stereo RCA audio cable to
the audio output (headphone or line
output) of your computer.
(This will most likely silence your
computer speakers.)
2
3
1
To Next Page
Loading...
