M-Audio DCP-200 - Page 37

User Guide 37DCP-200
‣ To adjust the volume of the Main Voice:
PresstheVoice/FunctionbuttontoenterEditMode.
Press the Voice Volume key (F#0).
      The
LEDdisplaywillshow

Use the Data Control knob to adjust the Voice volume.
‣ NOTE: If Split Mode is engaged and Layer Mode
is selected, the Layer Voice will only be applied
to the keys to the right of the split point. The Left
Hand Voice will remain the same as was specied
for Split Mode.
2
MASTER VOLUME
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
vol
C0 C1
F#0
3
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
127
1
Reverb
Song
RECORD
Data Control
[Assignable]
Metronome
Voice / —
Function
StR
Note to MIDI Users:
The Main Voice will be transmitted on the
selected Main MIDI Transmit Channel. The
Layer Voice will be played on the selected
MIDI Transmit Channel +2. So if the Main
Voice is transmitting on MIDI channel 1,
the Layer Voice will be transmitted on MIDI
channel 3. For information on setting the
Main MIDI Transmit Channel, please read
the section entitled Main MIDI Transmit
Channel in the MIDI Functions portion of
this User Guide.