MacDon R113 - Page 6

Section
Summary of Change
Internal Use Only
3.2.1 Installing Latch Assembly, page
14
• Step 13, page 15
Added part numbers for clarity:
• MD #120333
• MD #18648
Tech Pubs
3.2.2 Installing Transport Assembly,
page 16
• Step 1, page 16
Revised step. Hardware is now discarded. Tech Pubs
3.2.2 Installing Transport Assembly,
page 16
• Step 3, page 16
Added part numbers for clarity:
• MD #136157
• MD #112130
• MD #136122
Tech Pubs
3.2.2 Installing Transport Assembly,
page 16
• Step 10, page 17
Added step for model years 2018 and prior.
ECN 56953
ECN 57017
Product Support
3.2.2 Installing Transport Assembly,
page 16
• Figure 3.14, page 18
Updated picture to show new cover assembly that does
not include a module.
ECN 57834
3.2.2 Installing Transport Assembly,
page 16
• Step 13, page 18
• Step 14, page 18
Moved steps and associated picture from 3.2.4 Installing
Transport Valve, page 21 to this section because module
has to be removed and reinstalled.
ECN 57834
3.2.2 Installing Transport Assembly,
page 16
• Step 15, page 18
Added step and revised associated picture to show P-clip.
ECN 57455
3.2.2 Installing Transport Assembly,
page 16
• Step 16, page 18
• Step 17, page 19
Added steps and associated pictures.
ECN 57834
3.2.3 Installing Transport Wheels, page
20
Removed steps for relocating the axle on the right side of
the transport assembly.
Tech Pubs
3.2.5 Installing Transport Swing
Cylinder, page 22
• Step 2, page 22
Added part numbers for clarity:
• MD # 281101
• MD #18609
Tech Pubs
3.2.5 Installing Transport Swing
Cylinder, page 22
• Step
4, page 22
Revised step to identify dimension. Tech Pubs
3.2.5 Installing Transport Swing
Cylinder, page 22
• Step 5, page 23
Added part numbers for clarity:
• MD # 281101
• MD #18609
Tech Pubs
214633 iv Revision C