MacDon R113 - Page 8

Section
Summary of Change
Internal Use Only
• Step 17, page 29
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step 35, page 32
Added part number MD #30753 for clarity.
Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 3, page 33
Added step and revised associated picture. Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 4, page 33
Revised step to reference the correct bracket.
Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 5, page 33
Revised step:
• Two nuts (MD #136431) and two bolts (MD #184667)
from the kit are used to install the light assembly.
Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 6, page 33
Added part number (MD #223185) for clarity.
Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 7, page 33
Revised step to reference the correct bracket.
Tech Pubs
3.4.1 Installing Light Assemblies, page
33
• Step 8, page 34
Added part numbers for clarity:
• MD #136178
• MD #50101
Tech Pubs
3.4.4 Connecting Selector Valve and
Transport Lighting Module, page 36
• Step 1, page 36
Added step and associated picture.
ECN 57834
3.4.5 Installing Remote Control, page
36
• Figure 3.64, page 37
• Figure 3.66, page 38
Added picture and revised associated NOTE to identify
the fuse inside the remote control.
Tech Pubs
3.4.6 Installing Slow Moving Vehicle
Sign, page 39
• Step 2, page 39
Added “washers” and the NOTE to the step.
ECN 57755
3.4.6 Installing Slow Moving Vehicle
Sign, page 39
• Step 3, page 39
Added part number MD #259218 for clarity.
Tech Pubs
3.4.6 Installing Slow Moving Vehicle
Sign, page 39
• Step
4, page 39
Revised step as follows:
• Parts are retrieved from the shipping bag, not reused.
• Added part numbers MD #184667 and MD #136431
for clarity.
Tech Pubs
214633 vi Revision C