Page 11
5.6 Program System Channel (TX & RX)
1) Press “→” button to enter System Channel setting.
2) Press “↑” and “↓” button to change system channel as a whole or…
3) Press “→” button to go to the digit on the left.
4) Press “↑” and “↓” button to change numeric value.
5) Press “→” button to go to the next digit to the right and repeat step 4.
6) Press BACK button to go back to step 2 or 3.
7) Exit Program System Channel by pressing the “BACK” button until the
cursor is shown next to “CHANNEL”.
8) Press “↑” and “↓” button to scroll through other Flex EX2 settings.
5.7 Program RF Power (TX)
1) Press “→” button to enter RF Power setting.
2) Press “↑” and “↓” button to change RF power (0.01mW ~ 10mW).
3) Press “→” button and then “↑” and “↓” button to enable or disable RF
power adjustment via transmitter dipswitch.
4) Exit Program RF Power by pressing the “BACK” button until the cursor is
shown next to “RFpower”.
5) Press “↑” and “↓” button to scroll through other Flex EX2 settings.
5.8 Program Pushbutton Functions (TX)
1) Press “→” button to enter Pushbutton Function setting.
2) Press “↑” and “↓” button to change pushbutton function as a whole or…
3) Press “→” button to go to the digit on the left.
4) Press “↑” and “↓” button to change numeric value.
5) Press “→” button to go to the next digit to the right and repeat step 4.
6) Press BACK button to go back to step 2 or 3.
7) Exit Program Pushbutton Functions by pressing the “BACK” button until
the cursor is shown next to “PB FUNC”.
8) Press “↑” and “↓” button to scroll through other Flex EX2 settings.
The transmitter pushbutton function table on Section 12 Part-B illustrates which numeric value
corresponds to which pushbutton function.
5.9 Program Rotary Switch Functions (TX)
1) Press “→” button to enter Rotary Switch Function setting.
2) Press “↑” and “↓” button to select A/Off/B, A/B/A+B or A/A+B/B rotary
switch sequence.
3) Exit Program Rotary Switch Functions by pressing the “BACK” button until
the cursor is shown next to “SW FUNC”.
4) Press “↑” and “↓” button to scroll through other Flex EX2 settings.
To Next Page
Loading...
Need help?
General
