Mahr GmbH, MarSurf M 300 and RD 18
3
11. Only Mahr-trained personnel are permitted to carry out work on this instrument
and its components. Protective covers must only be removed by trained techni-
cians and only when servicing is required. Any procedures carried out on this
instrument that go beyond those tasks described in the operating instructions
will void the equipment warranty. Mahr GmbH declines all liability for damage
caused by unauthorized procedures.
12. Do not use fluids on or near the instrument and its components.
13. Do not use cleaning materials which contain harmful substances. Do not use
solvents.
14. Inspect the connecting cables at regular intervals and check for damage. Change
damaged cables immediately (Mahr service personnel).
For the MarSurf M 300 and RD 18, Bluetooth technology has as yet
been approved in Europe and North America only! Approval in further
countries is in progress. In case of doubt please contact your Mahr
partner!
To Next Page
Loading...
Need help?
General
