Advanced features Chapter 9
Mastersizer 2000 Page 9-7
To transform a result in a manual measurement:
1. Select Measure-Manual.
2. Once the background measurements are complete, press the Options button.
3. Select the Material tab.
4. Select the Advanced button in the Result calculation section.
5. Select the Enable transformation check box and select the relevant Trans-
form Volume to radio button.
To transform a result in an SOP measurement:
1. Select the Material tab.
2. Select the Advanced button in the Result calculation section.
3. Select the Enable transformation check box and select the relevant Trans-
form Volume to radio button.
To transform a result in an existing record:
1. Open the relevant measurement file.
2. Select the record to transform.
3. Select Edit-Result and then click OK in the displayed dialogue.
4. Select the Material tab.
5. Select the Advanced button in the Specify new result calculation section.
6. Select the Enable transformation check box and select the relevant Trans-
form Volume to radio button. Click OK twice.
MAN0384-1.0 Mastersizer 2000.book Page 7 Tuesday, March 20, 2007 8:56 AM
To Next Page
Loading...
