M&C EC-30C - Fig. 24: Parameter Menu, Screen 2

EC-30C | 1.00.02 +49 2102 935 888 www.mc-techgroup.com 35
In the second part of the parameter menu, there are the following parameters:

Required deep-cooling temperature

Current date

Current time
PRG
ESC
1
2
3
Fig. 24: Parameter menu, screen 2
1 Line 1: Deep-cooling temperature 2 Line 2: Current date
3 Line 3: Current time
Note
You will find the permitted parameter ranges on page 36 chapter
‘7.9.1 Parameter settings’ .
Here are the definitions of the symbols used in the parameter menu:
Symbol Definition
Information about the time period the
unit has already been running
Setting of the required service interval
Setting of the mA-output and of the
correlated temperature interval
Setting the required deep-cooling
temperature
Information: current date
Information: current time