EC-30C | 1.00.02 +49 2102 935 888 www.mc-techgroup.com 3
8 Installation instructions and mounting of the EC-30C 40
8.1 Installation instructions 40
8.2 Wall and rack mount 41
8.3 Mounting instructions for SR25.2 peristaltic pump (optional) 43
8.4 Tubing without heat exchanger purging (standard tubing) 44
8.4.1 Heat exchanger connections for tubing without purging 44
8.5 Tubing with heat exchanger purging for special requirements (optional) 46
8.5.1 Heat exchanger connections for tubing with purging 47
8.6 Duran-glass heat exchanger with GL-connections 48
8.7 PVDF- heat exchanger with PVDF-tube connectors 48
8.8 Electrical connections 49
8.8.1 mA-output 51
8.8.2 Liquid alarm sensor LA (optional) 51
8.8.3 Gas flow sensor FA 20 and gas flow meter FM 40 (optional) 52
9 Start-up 53
9.1 Preparation for start-up 53
9.2 Temperature chart of the start-up stages 54
10 Maintenance 58
10.1 Maintenance of the peristaltic pump type SR25.2 (optional) 58
10.1.1 Changing the pump tubing 59
10.1.2 Changing the contact pulley and springs 60
10.1.3 Cleaning the pump head 60
10.2 Changing the heat exchanger 61
10.3 Changing the 0-20 V-Module 62
10.4 Changing the buffer battery 63
10.5 Checking the temperature sensors 64
10.6 Changing the compressor unit 65
11 Decommissioning 66
12 Appendix 67
12.1 Overview of the EC-30C screens 67
12.2 How to configure the mA-output 68
12.2.1 How to calculate temperature based on measured mA-value 68
12.2.2 How to calculate mA-value based on measured temperature 69
12.3 Spare parts and consumables 70
12.4 Additional Information 71
12.5 Declaration of conformity 71
12.6 Certificates 72
12.7 Warranty 72
12.8 Liability and disclaimer 72
12.9 Storage 73
12.10 Shipping and handling 73
12.11 Proper disposal of the device 73
To Next Page
Loading...
