GENERAL CHARACTERISTICS AND SAFETY
10
547379EN
00 (08/03/2017)
00.1.4 SERVICING RULES
Do not carry out any work on the machine unless you have
followed a suitable training course and have the knowledge
required for it.
4
Make sure you have taken into consideration all the indicator
plates on the machine and in the instruction manual.
PRÉCAUTION
Be careful not to burn yourself when touching hot liquids or parts when
operations have to be done before the machine has had time to cool down.
AVERTISSEMENT
Before carrying out any operation on an electrically powered component,
activate the battery cut-o .
PRÉCAUTION
Press the battery switch at least 30 seconds after disconnecting the electrical
contact with the ignition key.
AVERTISSEMENT
If the telehandler does not have a battery isolating switch, disconnect the
battery terminals then gather them.
PRÉCAUTION
Before carrying out any welding operations, think of disconnecting computers.
PRÉCAUTION
A machine operating in a contaminated environment should be speci cally
equipped. Moreover, local safety notices deal with maintenance and repair
work on such machines.
ECU
2
1
To Next Page
Loading...
