Manitou AETJ 43 - Electronic Modules - Control and Settings; Electronic Control Units - Removal

109
ELECTRICITY
80
547379EN
80 (08/03/2017)
80.3.3 ELECTRONIC MODULES  CONTROL AND SETTINGS
ELECTRONIC CONTROL UNITS  REMOVAL
Base module control unit + safety control card
- Open the right-hand turret cover (1, 080 - 87).
- Open the front face of the base control panel (2, 080 - 87).
- Remove the plate holding the card in place (1, 080 - 88) and
remove the cards:
- Safety control card (2, 080 - 88).
- Base module control unit (3, 080 - 88).
Basket module control unit
- Remove the front face from the basket control panel (1, 080 - 89).
- Remove the basket module control unit (2, 080 - 89).
80 - 87
1
2
80 - 88
3
2
1
80 - 89
2
1