12.12.2008
2 3 112 331 en Additional pages GMK 4100
Additional
information
Table footnotes
G
Risk of accidents
When reading the chapter entitled
Driving with rigged crane in the operating
instructions mentioned above, pay close attention to:
– the safety instructions,
– the notes on driving distance,
– the inspections and notes before driving with a rigged crane,
– the inspections and notes for driving with a rigged crane, and
– the notes concerning the tables with boom positions and axle loads.
1)
Boom position to the rear: 0° position, boom over rear edge of truck
crane
Boom position to the front: 180° position, boom over driver's cab
2)
Front axle load: on the first and second axle line
Rear axle load: on the third and forth axle line
To Next Page
Loading...
Need help?
General
