Zoom and focus 30
© 2000 Martin Professional A/S, Denmark
MAC 2000 Performance Service Manual
REPLACE EFFECT FAN
1 Remove the top or bottom head cover,
depending on the fan to be replaced.
2 Unplug and free the fan wires.
3 Unscrew and remove the old fan. Install
the new fan and plug it in.
4 Tie the wires with new cable ties. Use
P/N 13104000, “Strap, black, high temp,
2.5x98mm”.
5 Apply power and check fan operation
before replacing the cover.
To Next Page
Loading...
