Martin MAC 2000 Performance - Framing;Iris;Gobo Module; Module Removal; Remove Framing;Iris;Gobo Module

Module removal 4
© 2000 Martin Professional A/S, Denmark
MAC 2000 Performance Service Manual
FRAMING / IRIS / GOBO MODULE
MODULE REMOVAL
REMOVE FRAMING/IRIS/GOBO MODULE
1 Remove top head shell and lock the head horizontally.
2 Remove fastening screws as shown on each side.
3 Unplug the fan wires, framing/iris/gobo wires, dimmer cable (16), CMYC wires, and the
CMYC thermosensor (T) as shown.
4 Carefully lift the module out by the bridges.
1
2
2
2
33
4
4
5
6
7
1. fan connectors
2. framing/iris/gobo connectors
3. module bridges
4. fastening screws
5. dimmer connector
6. CMYC connectors
7. CMYC thermosensor connector