Masimo Rad-8 User Manual

Rad-8 Signal Extraction Pulse Oximeter Operator’s Manual 2-1
2
2
system description
Introduction
The Rad-8 is designed for ease of operation. All pulse oximetry measurement information,
as well as device status data, is displayed on the front panel of the device. All user input is
handled by control buttons on the front panel and the sensor cable connection is located
on the left side (when horizontal) and on bottom of device (when vertical). Primary features
include:
■ Full Masimo SET technology in a small compact device
■ Supports the full line of Masimo sensors and patient cables (see Section 8, Sensors
and Patient Cables)
■ Supports standardization of sensors and pulse oximetry technology throughout the
hospital

Masimo Rad-8 Specifications

General

Display	LED
Pulse Rate Range	25-240 bpm
Pulse Rate Accuracy	±3 bpm
Trend Time	72 hours
SpO2 Range	0-100%
SpO2 Accuracy	± 2 digits (70-100% SpO2)
Power Supply	AC adapter or rechargeable battery
Perfusion Index (PI) Range	0.02% - 20%
PVI Range	0-100
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Relative Humidity	10-95% non-condensing
Altitude	Up to 15, 000 ft (4, 572 m)